One coat Gel-polish 04/160

Highly pigmented easy cover and easy soak off gel-polishes. Can also be used as blooming gel in nail art in combination with Blooming base gel.

Add to Cart € 12.00

One Coat Gel-polish 05

Highly pigmented easy cover and easy soak off gel-polishes. Can also be used as blooming gel in nail art in combination with Blooming base gel.

Add to Cart €12.00 € 6

One coat Gel-polish White 01/160

Highly pigmented easy cover and easy soak off gel-polishes. Can also be used as blooming gel in nail art in combination with Blooming base gel.

Add to Cart € 12.00

Carbide Drill bit for electric file manicure

Carbide drill bit - needle with a small cross-cut. Used to remove your overgrown nail from under the gel or acrylic extensions and electric file manicure. Suitable for refil and correction of gel and acrylic false nails.

Add to Cart € 18.00

Cat eye gel-polish

This product is great help in nail artists busy rutine. It takes only few seconds to hold the magnet over uncured surface and watch the magic. Cat eye gel-polish can be used over any color you like. Cure in UV for 1min LED 30sec.

Add to Cart € 15.00

Add to Cart € 12.50

Polygel applcation brush with spatula

Syntetic polygel application brush with spatula and uv protective cap.

Please note: our products are for professional use only.

Add to Cart € 16.00

Polygel Natural Pink 30ml

PolyGel is more flexible than acrylic, stronger than hard gel, and lighter than both. Even being flexible arch still can be pinched. Cures in LED for 1 min and UV lamp for 2min. Does not burn or heat at all!!! It does not run and gives possibilitu to sculpture all 5 nails at the time. Surfase selfleveles. Easy to work with for beginners and experienced nail techs.

Here is step by step instruction:

1. Apply cuticle remover and give it a min to soak, then push the cuticle down using cuticle pusher or orange wooden stick. Make sure you don't leave any skin bits on the nail plate as it may cause gel lifting later.

2. Buff the nail plate to remove shine.

3. Remove the dust using dust brush.

4. Apply Fresher to dehydrate the nail plate. Non of gels would be friendly with moist or grease.

5. Apply Strong/Gentle primer. Now nails are ready for base application.

6. Apply base coat in thin even layer avoiding the skin. Touching the skin also can cause product lifting. Cure in the lamp for 1 min.

7. Using tips, apply Polygel and also cure each nail for 1 min.

8. File false nails to a desired shape and remove dust using dust brush.

9. Apply Youforianails gel-paint or gel-polish colour. Cure in the lamp for 1 min. the list as it is not

10. Apply top coat to seal the colour and cure for 1 min. Remove sticky residue layer if any, using lint free wipes and finishing wipe.

Steps to Polygel application:

1. Scweeze a ball of gel out of the tube and use your spatula to apply it in the tip.

2. Deep your brush into finishing wipe ( you can fill small dispenser or small jar) and tap it on the tissue to get rid of excess of moist. Spread polygel evently in the tip.

3. Start applying pressure from cuticle zone to free edge of the nail (from skin towards the direction of growth). Turn over, smooth the surface underneath using the brush, remove the excess of gel on the sides if necessary. Now cure for 1 min.
P.S. Every time when brush gets sticky, clean it by dipping into finish wipe and tapping on the tissue. When applying gel, don't forget about apex (stress zone). It has to be thick enough to avoid breaking.
I wish you all the best with your work.

Please note: our products are for professional use only.

Add to Cart € 14.70

Clear Polygel 30ml tube

PolyGel is more flexible than acrylic, stronger than hard gel, and lighter than both. Even being flexible arch still can be pinched. Cures in LED for 1min and UV lamp for 2min. Does not burn or heat at all!!! It does not run and gives possibilitu to sculpture all 5 nails at the time. Surfase selfleveles. Easy to work with for beginners and experienced nail techs.

Here is step by step instruction:

1. Apply cuticle remover and give it a min to soak, then push the cuticle down using cuticle pusher or orange wooden stick. Make sure you don't leave any skin bits on the nail plate as it may cause gel lifting later.

2. Buff the nail plate to remove shine.

3. Remove the dust using dust brush.

4. Apply Fresher to dehydrate the nail plate. Non of gels would be friendly with moist or grease.

5. Apply Strong/Gentle primer. Now nails are ready for base application.

6. Apply base coat in thin even layer avoiding the skin. Touching the skin also can cause product lifting. Cure in the lamp for 1 min.

7. Using tips, apply Polygel and also cure each nail for 1 min.

8. File false nails to a desired shape and remove dust using dust brush.

9. Apply Youforianails gel-paint or gel-polish colour. Cure in the lamp for 1 min. the list as it is not

10. Apply top coat to seal the colour and cure for 1 min. Remove sticky residue layer if any, using lint free wipes and finishing wipe.

Steps to Polygel application:

1. Scweeze a ball of gel out of the tube and use your spatula to apply it in the tip.

2. Deep your brush into finishing wipe ( you can fill small dispenser or small jar) and tap it on the tissue to get rid of excess of moist. Spread polygel evently in the tip.

3. Start applying pressure from cuticle zone to free edge of the nail (from skin towards the direction of growth). Turn over, smooth the surface underneath using the brush, remove the excess of gel on the sides if necessary. Now cure for 1 min.
P.S. Every time when brush gets sticky, clean it by dipping into finish wipe and tapping on the tissue. When applying gel, don't forget about apex (stress zone). It has to be thick enough to avoid breaking.
I wish you all the best with your work.

Please note: our products are for professional use only.

Add to Cart € 14.70

Youforianails ICE ONE LED LAMP 48W

LED 48W White Light ICE ONE

Properties:

Power Consumption: 48W / 24W
Adapter:
Rated Input: 100-240V 50/60 HZ 1A
Rated Input: DC 24V 1.5A rated power
Size: 15 x 19 x 8.5 cm
Wavelength: 365 + 405nm
LED: 30 pcs

Accessories:
1 x UV LED Lamp
1 x AC / DC Adapter
1 x English Manual

LED Lamp - product description

New, elegant design, white colour.
It is designed for professionals to cure gel and gel polish.
Quick drying: GHB nail dryer can harden UV/LED gel fast
The fastest drying time is 5 seconds.
By pressing the on-off button for 2 seconds lamp switches its power from 48W to 24W to avoid burning sensation on sensitive clients.
3 kinds of time setting: 5 seconds, 30 seconds or 60 seconds.
Auto infrared induction (sensor)

By placing your hand into the machine without pressing time setting button, it starts automaticaly with Its maximum working time of 120 seconds.

Heat dissipation hole and fan design can cool the machine continuously for 30 seconds, also protects the machine from overheating.

Add to Cart € 70.00

Yacht Club 5ml

Smooth highly pigmented gel-Paint. Cover by one coat of colour, strike-free. Cure 2min in uv-lamp, 1min in led lamp

Add to Cart € 13.00

"MOSAIC" SCULPURE FORMS ROUND 100PCS

Add to Cart € 10.50

MOSAIC SCULPTURE FORMS OVAL 100 PCS

Add to Cart € 10.50

SLIDER NAIL ART F21 GOLD

Youforianails presents Express nail design for masters and manicure lovers. Water decals for a full nail.

Please note: our products are for professional use only.

Add to Cart €4.00 € 2.8

Online shop

LED 48W White Light ICE ONE

LED Lamp - product description